Account
Inquiry
Pricing breaks down by volume—sample orders run higher per meter, mid-range around 2000m drops to about $1.20/m, and bulk at 5000m or more can hit under a dollar, give or take depending on gauge.
We've seen these go into warehouses and apartment buildings mostly, for open or concealed runs in dry locations—basically anywhere you need a 600V rated cable that won't quit at -40°C.
Solid or stranded copper conductors (ASTM B3/B8 compliant) wrapped in XLPE insulation, then PP tape, then aluminum interlock armor—teh color coding (black/white for 2-core, black/white/red for 3-core) makes termination straightforward.
What it's not suited for is wet locations or direct burial, so don't try that—the aluminun armor and PP tape are strictly for dry interior use, and we usually have stock on 75m or 150m plywood drums.
You'll get COAs with every batch, and the PP tape wrapping is a detail most buyers don't think to ask about—it prevents the armor from abrading insulation during pulling, which saves headaches on long runs.
We've been running these through C22.2 No. 51 and No. 38 testing for years, so the tolerances are tighter than what you'd get form a generic import—cost-effective because we skip the middleman markup, not because we cut corners.
Yes, we typically require a minimum of 500m per order, but you can mix 75m and 150m drum lengths to hit that number. Let us know your preferred split.
For standard orders, lead time is around 2-3 weeks from payment confirmation. If you need it faster, we can sometimes expedite for a small fee.
Absolutely, we can supply a CSA certificate and a mill test report for each production lot. Just request it when you place the order.
The PP tape is mainly for extra mechanical protection and moisture resistance during storage and transit. It's not required for installation and can be removed easily.
We can cut custom lengths, but standard plywood drum sizes are optimized for 75m and 150m. If you need something different, let us know the length and we'll quote accordingly.
