Account
Inquiry
We’ve had customers using these in automated pick-and-place arms where constant flexing would kill a standerd ribbon cable, and the wire clip actually keeps connector seated when the robot jerks—it’s a small thing but saves rework time.
≤50V and ≤2A with contact resistnce under 20mΩ, so signal loss stays minimal over 1m or 2m runs, and insulation resistance is ≥100MΩ which matters for noise-sensitive sensors (typically in the 0-10V range).
It’s basically a 9-pin JST XH at 2.5mm pitch, but our company can swap to PH or EH if your board layout is tighter—though don’t try it outdoors since it’s IP20 and not waterproff, teh PA66 shell handles -25°C to +85°C fine for factory floor use.
MOQ is 500 pieces, lead time runs about 2 weeks, and we’ll send a sample first if you want to check fitment—usually have stock for black PVC pipe, but custom lengths or colors add a week or so.
MOQ is 500 pieces. If you need a sample first to test fitment, we can provide one before you place the bulk order.
This harness is ROHS compliant, and UL or CE certification is available on certain models. Just let us know which certification you need when ordering.
Yes, we offer custom lengths and wire colors. Standard is 1m or 2m with black wire, but we can adjust both to your specs.
It works from -25°C up to +85°C. The PA66 connector shell is high-temp resistant, so it holds up fine in industrial environments within that range.
No, it has an IP20 protection level, so it's not waterproof. It's designed for indoor or dry industrial use. If you need waterproofing, we'd need to discuss a different connector option.
