Account
Inquiry
We got the RFQ in yesterday for the shoulder-mounted brush cutter and after checking the specs against your requrements, it all lines up pretty well. The 35.6cc four-stroke engine is base on the GX35 platform so you're looking at the same reliability as that Honda clone — it's basically what most rental fleets use, and the 1.0KW output is enough for grass, blackberry, and light shrub work on properties form 500 to 1000m² or so.
The straight metal blade is included in the order and that's what you'll want for heavier stuff like tea trees and woody stems rather than just grass along fence lines. One thing we noted is the 8mm solid steel drive shaft with a 9-tooth gear — it's a bit more than the hollow shaft alternatives that tend to snap if you hit a hidden stump. But I wouldn't run this as a brush cutter for say heavy forestry or pampas grass thicker than a thumb; that's better suited to a higher-displacement unit.
It comes with a diaphragm carburetor which is honestly a relief because gravity-feed carbs will give you grief on slopes and at odd angles—the forced air cooling means you can work through the afternoon heat without worrying about overheating. The fuel tank is 630ml and oil is 100ml, so you've got about 40 minutes of continuous trimming before refueling (depending on throttle use, obviously). 26mm aluminuim pipe on the shaft, and the weight is listed at 6.7kg, but in practice with the blade and guard attached it's more like 7.2kg or so — still manageable for a full day.
We usually have these in stock but the MOQ is 10 units and we had to push the order because the suppiler confirmed the CE cert is current for all export documentation. Teh stop switch and protective guard are both present — some Chinese imports skip the guard to cut cost, but Lambotec includes it standard. Also, what it does is it uses a forced air cooling system that's actually better than the passive fan on older models; you can feel the difference after 15 minutes in tall grass.
Anyway, the bore x stroke is 39mm by 30mm which gives a fairly low-end torque curve — that's good for clearing dense undergrowth without stalling. The order is for 14 units total: 10 for the main site crew and 4 spares. I've specified the straight blade option in the PO but they also offer a tri-blade for finer grass if someone wants to swap later — lead time on those is 2-3 weeks typically.
Typically we start at 50 units per order for this model, but we can negotiate smaller trial orders for first-time buyers. Just reach out to confirm.
Standard production takes about 20-25 working days after order confirmation, plus shipping time. We can expedite for larger volumes if needed.
Yes, it's CE certified, and we provide a certificate of conformity with each shipment. If you need additional documentation like a test report, just ask.
Absolutely, the 8mm solid steel shaft with 9 teeth is built for tough jobs like dense shrubs and tea trees. It's durable and resists bending under normal use.
Each unit is packed in a sturdy cardboard box with foam inserts to secure the blade and engine. For bulk orders, we use palletized packing with shrink wrap for extra protection.
