52cc 2-Stroke Petrol Grass Brush Cutter with Metal Blade for Lawn & Shrub Maintenance

We’ve got about 200 units in stock right now, so shiping usually goes out within 3-5 working days—check lead time if you need more than 50 though, as that might push it to 10 days or so.

The 1E44.5F engine pushes 1450W at 3000rpm idle, which is better than most 50cc class units for sustained heavy, and the double-layer air filter means you’re not stopping to clean it every 20 minutes in dusty conditions.

It’s basically a 52cc two-stroke with a metal blade standerd—most buyers go with the 4-tooth blade for thick scrub, but nylon head is fine for lighter grass, though it’s not really suited for wet, dense brush where the blade will bog down.

Vibration control is decent with the spring damping, but you’ll still feel it after an hour or so (teh 8.5kg net weight doesn’t help much), and the enlarged muffler drops noise roughly 3-4 dB compared to older designs.

CE, GS, and EMC are on the COA, and the 40:1 mix ratio is pretty standard for these engines—use a good synthetic oil or you’ll gum up the carb.