Account
Inquiry
You’ve probably been dealing with areas over 5000m² where smaller trimmers just burn out or vibrate too much—we’ve seen that a lot, and buyers basically want something that won’t quit mid-job.
The BG520 runs on a 52cc two-stroke with 1.65kw at 8500rpm, and it’s air-cooled so it keeps going even when you’re pushing it hard through heavy brush; we pair it with a straight metal blade that handles shrubs and small branches, not just grass.
Mix your fuel at 1:25 or 1:40, the 1200ml tank gives you about 20-30 minutes of non-stop work—one buyer told us it cut their time on a steep slope by nearly half compared to their old electric unit.
Most buyers go with our standdard 26mm pipe and 9-tooth shaft, but our company can swap to 28mm or adjust harness for your crew’s comfort; OEM options are possible if you’re looking at a bulk order of 200 units or so.
Lead time is typically 30-45 days after deposit, depending on your color and packaging choices—shiping by sea form China adds 25-30 days, though we do air freight for urgent orders (check stock first, we sometimes have a pallet ready).
Anyway, we’ve got CE and EMC certs on file, and teh price drops noticeably at 500 units—just let us know if you need a COA or TDS, since some clients ask about emission specs.
It runs on a 2-cycle oil mix, either 1:25 or 1:40 gas to oil. Stick to one ratio for consistency, and don't skip the oil—it needs it for lubrication.
Our standard MOQ is 50 units for this model, but we can negotiate lower quantities for first-time buyers or sample orders—just reach out to us.
Lead time is around 20-30 days after order confirmation, depending on current production load. We can give you a tighter estimate once you place the order.
Yes, it's certified with both CE and EMC. We can provide copies of the certificates upon request—just let your sales rep know.
We can customize the cutter head for other blade types, but the pipe diameter is fixed at 26mm/28mm. For large customization volumes, we're open to discussing options.
