Account
Inquiry
You’re looking at a Q-Switch ND YAG laser machine that’s built for pigmentation and tattoo removal—we’ve been shippng these for a few years now, and they hold up. It runs on 1064nm and 532nm wavelengths, so it handles black and blue pigments with the 1064, while the 532 gets reds, pinks, and browns pretty well. pulse width is under 10 nanoseconds, which basically means it shatters pigment fast without cooking the skin around it.
Most buyers use this for commercial clinics or med spas—it’s not portable at 35 kilos, so you’ll want a dedicated spot for it. Teh 8-inch touch screen is straightforward, and you can switch between a single 7mm rod or dual 6+7mm rods depending on the job. It’s not great for home use or mobile setups, but for a treatment room, it’s solid. We usually have stock, but confirm lead time if you need it fast (check with us).
Energy output tops out at 2400mJ for 1064nm and 1200mJ for 532nm, with a repetition rate of 1 to 10Hz—so you can dial it up or down base on the patient’s skin. The spot size adjusts from 1mm to 5mm, which gives you some control for fine work versus larger areas. it have both air and water cooling, and it runs on AC 110V or 230V, so you don’t need to rewire your space. Dimensions are 47x36x105 cm, give or take.
One thing you might not think to ask: the aiming beam is a red diode at 650nm, so you can see exactly where you’re firing before you pulse. That matters more than you’d expect for precision work. It’s CE0197 and ISO13485 certified, which covers most regulatory needs, but check your local requrement anyway.
We source these from the factory in China, and they come with a COA and basic setup guide—no fluff, just the machine and what you need to get going. The double rod option is better than the single for versatility, but if you’re mostly doing tattoos, the single rod works fine. 2400mJ is the max on standdard units, though higher energy models exist if you push for them.
The MOQ for the HS-250 is typically 1 unit for stock models, but we can discuss larger quantities if you need a bulk order.
Yes, we include copies of the CE0197 and ISO13485 certificates with every unit. Just let us know if you need them in a specific format.
Standard lead time is about 7 to 15 working days, depending on stock levels. If you need it faster, we can check availability and possibly expedite.
Yes, you can choose between the single 7mm rod or the double 6+7mm rods configuration. The double rods give you more energy and flexibility for different treatments.
The system combines air and water cooling to keep the laser stable during long sessions. It needs minimal maintenance—just check the water level and clean the air filters every few months.
