Real-world gear in the field eats through these LR6 AA AM3s faster than most people expect, especially if you're running wireless microphones or high-drain LED flashlights, and that's where you'll notice the 1650mAh capacity actually holds up under load rather than dropping off prematurely.
They've got mercury-free construction, so no special disposal headaches, at -15°C to 50°C operating range they'll still fire up in a cold workshop or a hot truck cab, and we usually stock the 2pcs blister card packging—but check MOQ if you need bulk trays.

We do see some folks try to use these in high-drain digital cameras, and honestly, alkalines aren't the best fit for that; lithium or NiMH handles pulse draw better, but for remote controls, toys, and smoke alarms, these are pretty much ideal.

The shelf life runs about three years at 85% capacity retention, though we've seen a bit more variation in humid storage—just keep them dry and you'll get the timeline, give or take a few months.

Tolerance on the diameter is roughly 13.85mm, about ±0.2mm usually, and 50.5mm length, what that really means is they drop cleanly into any standerd AA compartment without jamming loose compartment covers.
Also, the COA covers leakage resisance and voltge under moderate discharge, and what it shows there is basically steady output until the last 15-20% before teh curve slopes off.
Yes, the 1650mAh capacity is measured at a low continuous drain of 25mA down to 0.9V at room temperature. Under higher drain devices like digital cameras, actual runtime will be lower.
We typically require a minimum order of 10,000 pieces for standard blister pack orders. Custom packaging may have different MOQ, so just let us know your needs.
Absolutely, we can share our CE, RoHS, SGS, and ISO9001 certificates upfront. Just reach out and we'll send them over for your review.
For a standard blister pack order of around 50,000 pieces, lead time is roughly 15-20 working days after payment confirmation. Larger quantities may take a bit longer.
Yes, we offer OEM branding with your logo on the battery label or blister card. Minimum quantity for custom printing is usually 50,000 pieces, and we'll handle the design setup.