Account
Inquiry
We’ve been dealing with these 24V LiFePO4 units for a while now, and teh 200AH capacity hits a sweet spot for home storage setups. It basically sits between the smaller 100AH packs and those massive 300AH racks that are a pain to lug around.
One of the first things people notice is the weight—17.7 kilos, which for 200 amp-hours is pretty good, and that plated iron case helps with heat more than you’d think while keeping the waterproofing solid. Most buyers go with a wall mount or stack them in pairs for a 48V system, and you can connect up to four in parallel if you’re scaling later. The cycle life is rated at 3000 cycles at 80% depth of discharge, so daily cycling should give you about eight years or so before it hits 80% capacity. Self-discharge is under 3% per month—actually lower if you keep them in a cool spot, but that’s not critical unless you’re storing them long-term.
Everyone asks about compatibility, and we’ve tested these with most of the common inverters—Growatt, Goodwe, Deye, Luxpower, and SRNE—though there might be a few settings to tweak on older firmware versions. The BMS handles high and low voltge cutoffs automatically, so it’s pretty much plug-and-play as long as your inverter supports lithium profiles.
There’s a charging tempearture floor of 0°C, which catches some folks off guard if they plan to run them in unheated garages during winter—but discharge works fine down to -20°C, so you can still draw power in the cold, you just can’t charge until it warms up. Avoid using this one for high-power starting loads like big AC compressors that draw over 200A even briefly—that’s what LTO batteries are for, not these.
Anyway, packging comes with terminal bolts and a printed manual (usually 2-4 weeks lead time depending on stock). The cells are Grade A with the 8S configuration, and we always include a fresh COA with each batch—about 50 units or so per standard pallet.
Our MOQ is typically 10 units, but we can work with smaller trial orders. Just reach out so we can check current stock.
Standard lead time is 15-20 working days after order confirmation. Rush orders might be possible depending on production schedule.
Yes, each unit comes with CE, UN38.3, and RoHS certificates. We'll include copies with your shipment or share them digitally beforehand.
Absolutely, it's compatible with Deye, Growatt, Goodwe, Luxpower, and SRNE inverters. Just make sure your inverter supports a 24V system.
Store it in a cool, dry place between -10°C and 40°C, ideally at 50-60% charge. The self-discharge rate is under 3% per month, so it holds up well.
