Account
Inquiry
So you're looking at the 730W unit with the 80mm frame, and the first thing most people want to know is whether it'll handle continuous duty cycles—it does, pretty comfortably, though we usually recommend confirming your specific runtime expectations with our tech sheet. The 3000 RPM is fixed speed unless you're using a variable frequency drive, which this motor is actually designed to pair with, so that's a nice bit of flexibility for fine-tuning torque delivery in your setup.
You'll get 3.5 Nm at the shaft, and we've seen these go into conveyor systems and small pumps mostly, but also some packaging machinery where the 220V single-phase is a big advantage over three-phase installations. Honestly, the closed-type protection casing means it's better suited for clean-ish environments than dusty mills or wet washdown zones—just something to keep in mind if your floor sees a lot of debris or moisture.
Most buyers who come to us are replacing older motors or scaling up a prototype, and they typically ask about lead times first; we usually have stock on the 80SF-M03520+KA05, but if we're between, it can be 20 days or so from order to dispatch. MOQ is 5 units for the standerd packaging, which is individually boxed with foam inserts, but we can do bulk crates if you're ordering 50 or more—that saves about 8% on per-unit cost.
The CE and ISO9001 certifications are, and we do send a COA with each shipment showing teh actual test data for that specific motor—things like winding resistnce and insulation breakdown voltage at 1.5 kV. One thing buyers don't always think to ask is that the 2-pole design gives you a higher starting current compared to a 4-pole, so make sure your circuit breaker is that inrush, especially if you're running multiple units off the same line.
Basically, if you're after a single-phase workhorse that doesn't need a three-phase converter and you've got a consistent load profile, this is a solid match. We see a lot of machine shops and small factories using them, and the feedback is that the 730W is better than most comparable units at holding torque under load—roughly 3.4 Nm sustained, which is tighter than what we measure from some of the bigger brands we've compared side by side.
Our standard MOQ is 10 units, but we can sometimes accommodate smaller orders depending on stock. Just reach out to confirm.
Usually 15-20 working days for standard orders. If you need it faster, let us know and we can check expedited options.
The CE certification applies to the complete motor assembly, so you're covered for both the electrical and mechanical parts under EU standards.
Yes, it's designed for variable frequency drives, so you can adjust the speed down from 3000 RPM. Just make sure your VFD is properly rated for a 730W single-phase motor.
Closed Type means the motor is totally enclosed, so it's protected against dust and splashes. It's suitable for typical industrial settings but not for submersion or high-pressure washdowns.
Upon receiving the industrial motor, the initial impression was overwhelmingly positive due to the exceptional logistics service. Unbelievably fast and efficient delivery was the highlight; the package arrived several days ahead of the estimated schedule, which was a fantastic surprise. The courier service handled the shipment with great care, and the tracking information provided was accurate and consistently updated, allowing for seamless monitoring from dispatch to doorstep. The packaging itself was robust and secure, clearly designed to protect such a technical piece of equipment during transit. Upon unboxing, there was no sign of any damage or mishandling, which speaks volumes about the logistical precision involved. Regarding quality, the motor presents a solid and well-constructed appearance. The materials feel durable and high-grade, and the overall finish is professional, aligning with expectations for an industrial component with CE certification. It has a substantial heft that suggests good internal build quality. The service aspect was equally commendable. Communication from the seller was clear, prompt, and helpful throughout the entire process, from order confirmation to post-delivery follow-up. Any preliminary inquiries were addressed thoroughly and courteously. This combination of swift logistics, apparent build quality, and attentive customer service made for a very smooth and satisfactory procurement experience. Ultimately, the transaction was handled with impressive professionalism from start to finish.
