Account
Inquiry
The brass body on this torch kit is what most buyers actually notice first — it handles heat dissipation way better than the cheap zinc alloys you see in entry-level kits, and the manual control gives you real precision on the flame adjustment, which matters when you're dialing in an oxidizing or carburizing flame for different alloys.
4.5 meters of 1/4-inch twin rubber hose comes standerd, and that length is usually enough to reach around most workstations without dragging the tanks too close. The gas flow is consistent through that diameter for both oxygen and acetylene, but you'll want to check your regulator fittings — we've seen some buyers need adapters for older tank valves, though the included regulators are pretty standard for most setups.
What it does is cover welding, heating, brazing, and soldering with the tips provided — sizes 1, 2, and 3 for welding, plus a attachment and heating tip. The spark lighter is the flint type, not electronic, so it works reliably in dusty shop environments (we usually have stock on replacement flints). Goggles are included, but they're basic shade 5 — if you're doing heavy for hours, you'll probably want upgraded lenses anyway.
One thing that's not immidiately obvious is the ABS case — it comes in silver, black, yellow, or blue, but the color doesn't affect anything, so just pick whatever's in stock. The case is sturdy enough for shop transport, but don't expect it to survive a drop from a truck bed without cracking. OEM customization is available if you need different branding or a specific color run, but the MOQ is typically 50 units or so for that.
Basically, this kit works well for general fabrication work, but it's not suited for precision TIG or MIG tasks — it's a gas torch setup, period. The flame control is manual, so you're adjusting valves by hand, which gives you fine control but requires a steady hand for small brazing joints. Most buyers go with the 10-piece tip set for versatility, though kit as shipped covers most common appliction without needing extras.
We can provide material certificates for the brass body and other components upon request. Our production follows standard quality checks, so you'll get a reliable kit with the torch, regulators, and accessories tested before shipping.
MOQ for this model is typically 50 units, but we can discuss smaller trial orders. For custom case colors, we offer silver, black, yellow, and blue as standard, and OEM orders can match your brand colors with a minimum quantity.
Standard lead time is around 15-20 working days for stock items. For OEM orders with custom branding or packaging, expect 25-30 working days depending on the complexity.
Yes, the included regulators are standard for oxygen and acetylene, with 1/4-inch hose connections. They work well with most industrial setups, but double-check your tank fittings if they use a different standard.
Each kit comes in an ABS case with foam inserts to protect the torch, tips, and accessories during transit. For bulk orders, we can store the kits in our warehouse and ship on your schedule, as long as we agree on the timeline.
