Account
Inquiry
Damp bathrooms after a hot shower are miserable—steam fogging the mirror, moisture soaking into the ceiling paint, that musty smell that just won't leave. You need to pull that humid air out fast and have a heat source that works the second you step out, not one that takes ten minutes to warm up.
What it does is hit all three problems at once. The 35W motor moves 270 m³/hr through that 120mm side ducting (3m of flexible duct included), so condensation drops noticeably within minutes. Meanwhile the four 275W infrared lamps kick out heat instantly—no warm-up curve, just radiation that hits skin directly.
4×275W gives you 1100W total on the low setting or all 2000W when you crank it, which is better than most single-bulb heaters for a medium to large bathroom. The 8W LED in the center pushes 1000 lumens at 4200K neutral white, so it's actually usable for shaving or makeup without that harsh yellow cast. Minimum ceiling cavity depth is 250mm, and it's IPX2 rated—fine for zone 2 or 3 but don't put it directly over a shower head.
We usually stock silver and gold trim options, and the whole unit comes with the wall switch and the ventilator. It's got EMC, SAA, TUV, CB, CE, and RoHS certs stacked on it, so compliance isn't a headache for most markets. There's a catch though—the 3m duct length is fixed, so if your ceiling cavity routes differently, you'll need an extension or a different install approach.
MOQ is typically 50 units or so for whlosale, but our company can do smaller runs for testing if you're validating a batch. Lead time is roughly 20 days form order confirmation, give or take depending on current factory load. We've seen some buyers use these in commercail changing rooms, but honestly the IPX2 rating limits it—it's not suited for wet-area installs or high-humidity industrial spaces.
Anyway, the 35W motor is quieter than most in this class, which you don't think to ask about until you're standing under it. It's a solid unit for the price point—just confirm your ceiling cavity depth before ordering because 250mm minimum is non-negotiable with that side-ducted setup.
The 35W motor runs when you activate the ventilation function; it's not on constantly. The heating lamps (4x275W) and the 8W LED are controlled separately, so you can use the light or heat without the fan if you want.
You need at least 250mm of ceiling cavity depth to fit this unit. It's a side-ducted model with 120mm flexible ducting (3m included), so plan for that clearance above the ceiling.
Right now, the standard LED is 4200K neutral white at 1000lm. For wholesale orders, we can discuss customizing the LED color temperature, but minimums and lead times would apply—contact us for the details.
Yes, we include copies of all those certifications—EMC, SAA, TUV, CB, CE, and RoHS—with the shipment. They're valid for the current model, so you can use them for local approvals or retailer requirements.
For a custom color like white, the MOQ is typically 500 units, and lead time runs about 25–30 days after order confirmation. Standard silver/gold usually ships faster—around 15–20 days with no MOQ issue on smaller wholesale lots.
