Account
Inquiry
That 3μm repeatability is what actually holds up in production—most machines drift after a few runs but this one stays locked in.
We've been running these for about 18 months now and teh five-axis coordinated movement cuts clean on the A:360°/B:25° rotation without chipping edges, even on 0.3mm veneers.
Spindle speed hits 60k rpm but realistically you'll use 15k-45k for PMMA or zirconia depending on bur size (0.5mm for fine work, 2.0mm for bulk).
It does wet and dry milling both, so you don't need to babysit materail choice—hybrids and feldspar run dry fine, zirconia pretty much needs wet.
Lead time is usually 20 days or so but check current stock because we've had batches delayed on the pneumatic tool changer lately—it's a solid system once it's set up though.
It can go down to 0.3mm, so you can mill really thin veneers without cracking.
No MOQ—you can order just one unit, no problem.
It's ISO and CE certified, so it meets international quality and safety standards.
Yes, it does both wet and dry milling, so you can handle zirconia and PMMA without changing machines.
Usually ships within 2-3 weeks after order, depending on stock and shipping method.
