Rechargeable 18V Rotary Hammer with 0-950RPM Speed and 0-4300BPM Impact Rate for Construction Use

So we've been shippng this model for about six months now, and what it does is handle pretty much any drilling or chiseling job you'd throw at a construction site—switch between chiseling, chisel fixing, regular drilling, and hammer drilling without swapping tools.

You're looking at 0-950 RPM and 0-4300 impact rate, which is basically what the top-end 18V cordless hammer drills give you, and with 2.2J of impact energy (2.2 is enough for most concrete anchors up to 12mm or so).

4000mAh battery means you'll get around 45 minutes of continuous hammer drilling, and the charger kicks it back in about 2 hours—though we usually have stock, but confirm lead time if you need more than 50 units.

One thing buyers don't always think about is the flat drill function—it lets you set the chisel position without locking trigger, which is way better than roto-hammers that don't have that feature for, say, floor chipping or tile removal.

Anyway, teh brushless motor is a solid upgrade form brushed, and the SDS Plus chuck means any standerd SDS bit will fit; the 24mm concrete capacity is fine for residential slab work, but don't expect it to handle rebar-heavy demolition.

MOQ is typically 100 pieces for the LCH777-7, and our company offer it with or without the carry case, though (check lead time) the case adds about 10 days.