Account
Inquiry
Pretty much every installer we talk to runs into the same headache—wall anchors that can't handle the weight of a modern inverter unit, especially with wind shear and years of vibration wearing things down.
What ours does is spread that 200kg load across four mounting points using 2.0mm cold rolled steel, which holds up better than cheaper galvanized brackets that start bowing after a season or two.
The triangle structure is non-adjustable, so you don't get any wobble during instalation, and we coat everything in polyester powder (not just a basic spray) so corrosion stays minimal even in coastal humidity.
Lead time is usually 15-30 days for a 1000-set MOQ, but our company can sometimes squeeze in 500 if you're in a pinch, and teh payment splits between T/T or L/C depending on your preference.
Suface color comes white or milky white as standerd, but custom RAL codes are doable for orders over 2000 sets or so—just give us a heads-up before production kicks off.
One thing buyers often don't think about: rubber cushions we include are actually denser than the typical ones, which really cuts down that low-frequency drone form the compressor through the wall.
The MOQ is 1000 sets. If you need less, let's talk — we can sometimes accommodate sample orders or smaller trial batches.
Lead time is 15-30 days after order confirmation. We accept T/T or L/C — just let us know which works best for you.
Yes, we can supply material certificates and a test report for the 200kg load capacity. Just request it when you place the order.
Absolutely, we offer OEM customization for colors and packaging. Just tell us your Pantone or RAL code, and we'll match it with the polyester powder coating.
Each set includes 4 plastic expansion screws, 8 bracket carriages, 4 screw connectors, and 4 rubber cushions. Brackets are packed in standard export cartons — we can do custom packaging for bulk orders if needed.
