Account
Inquiry
We've got three clear pricing tiers on this—sample runs around $30 a pair with tooling included, mid-volume at roughly $18-22 per unit for 500 sets, and full bulk orders dropping closer to $12-15 depending on finish and steel grade, 201, 304, or 316L.
Basically, it's a 90×55mm 180° glass-to-glass hinge for 8-12mm tempered glass, laser-etched to your spec with options like PSS, SSS, TI, golden, black, or custom, and each one passes ISO-controlled QC—we check alloy composition during production, so you're not guessing on corrosion resisance.
Commercial shower installers and hotel specifiers go with these because they cycle well under heavy use, better than what I've seen from some other 180° hinges that drift over time; 304 is the sweet spot for most wet areas, but 316L handles coastal salt spray like a champ.
Lead time is usually 20-30 working days form order confirmation—sample we ship in a week or so once tooling is done—and COA covers teh metallurgical analysis and glass thickness verification (usually 2-4 weeks), so call ahead if you need faster turnaround.
One thing: it's not for soft or thin glass below 8mm—the clamping presure will crack it—and while MOQ for custom finishes sits at 100 sets across all grades, our company can mix 201, 304, and 316L in a single bulk order if you're covering different job sites.
We keep rough stock on 304 with PSS or SSS ready to trim, but confirm quantiy before you commit—our last full-batch run of 2000 went to a hotel chain for their new wing.
SS 201 is the most budget-friendly but less corrosion-resistant, SS 304 is the standard for most bathrooms, and SS 316L is marine-grade for harsh environments. We recommend 304 for typical use and 316L if you're near saltwater or chemicals.
For standard finishes like PSS or SSS, we can do small orders—even 50 pieces. But for custom colors or laser etching your logo, we typically require a MOQ of 200-500 pieces depending on complexity.
Yes, samples are available. Lead time is usually 3-5 work days for a stock finish, plus shipping. Custom finishes or etching add around 5-7 days.
All production is ISO quality controlled, and we can provide a mill certificate for the stainless steel grade you choose. If you need a specific test report (like salt spray for 316L), just let us know.
Yes, it's designed for 8-12mm tempered glass, so 10mm fits perfectly. No adapter or shim needed—just adjust the set screws to grip the glass securely.
