If you're regularly tackling large concrete floors where efficiency matters, gear-driven triple 20HP setup really does cut through tough coatings fast—we've seen it handle epoxy and old overlays in one pass, though it's overkill for small residential garages (stick to a walk-behind for that). 2. The remote control is actually pretty handy for letting the machine run while you check the dust collector or prep the next section, but the manual mode is there when you need finer control around edges or obstacles. 3. What it does is push a 1.8m or 2.5m working width depending on your head setup, and the 4 × 3 grinding head configuration gives a flatter finish than most planetary units we've sold, especially on uneven slabs. 4. We usually have these in stock, but with a 1359kg unit like this, shiping logistics take about 20 days or so—confirm lead time before your schedule gets tight, and we'll send teh COA with HPLC data on the grinding segments if needed. 5. One thing buyers don't think to ask is that the 50mm dust port works well with most standerd vacuums, but you'll want a 3-phase 380V supply already in place, since converting single-phase adds cost and hassle.
We require a minimum order of 1 unit for the F1 Team. That said, we can discuss larger volume discounts if you're planning to buy multiple machines.
The F1 Team comes with CE certification and a full set of technical documents including the wiring diagram, operation manual, and parts list. We can also provide a factory test report upon request.
The remote control lets you start, stop, and adjust the rotating speed from 0 to 1800rpm without touching the machine. It's a standard 2.4GHz system with a range of about 50 meters, so you can stay clear of dust and noise.
Sure – the F1 Team uses a 4×3 head layout, meaning 12 grinding heads total, and you can choose between a 1.8m or 2.5m working width. That gives you flexibility for different floor sizes.
Store it in a dry, covered area with temperatures between -10°C and 40°C. Keep the dust port covered and the gearbox oiled if you're parking it for more than a month.