Account
Inquiry
We were getting intermittent signal loss in a few of our microduct runs, and the standard connectors just weren't holding up under the vibration, so I went looking for something with a mechanical lock that didn't rely solely on friction.
The locking clip is POM, the body is transparent PA, and the anti-shock cover is PP — that combo lets you see the cable seating while the clip actually prevents pull-out, which is basically what we needed for teh 4mm and 6mm runs we're doing most of.
Working pressrue is 15 bar with burst over 45 bar, and tensile strength is rated at 1000N, though the allowed lateral pressure is only 100 N per 100mm — so don't use these where there's constant side-loading, they're really meant for straight-line duct work.
It's RoHS and ISO9001, and we got a COA with batch, but the connection cycles are only about 10 times (usually 2-4 weeks for us on a typical install), so these aren't for frequent reconfiguration.
The nickel-plated brass cartridge and stainless steel lock claws are a step up form the all-plastic versions we tried before, and the NBR seals handle the temperature range of -15 to +45°C just fine for our indoor cabinet setups.
We offer these connectors in 10 sizes: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 14mm, and 16mm. You can pick the one that fits your setup.
Yes, we can supply ISO9001, RoHS, and Pvoc certification copies along with your shipment. Just let us know what you need when placing the order.
Our typical MOQ is 500 pieces per size, but we can be flexible for first-time orders or samples. Contact us to discuss your specific quantity.
They're rated for up to 10 connection cycles. After that, the anti-shock covers and locking mechanism may start to wear, so we recommend replacing them for reliable performance.
Absolutely, we can customize packaging and labels to your specs. Just share your requirements, and we'll arrange it for your order.
