High Power Lithium Ion Battery Impact Wrench with 3600IPM Impact Rate for Heavy Duty Use

We've seen too many shops lose time fighting seized bolts with underpowered tools that just can't deliver the torque when it matters, especially on heavy equipment where a stuck fastener can stall an entire job for hours.

What this wrench does is hit that sweet spot between raw power and control — the 3600 IPM impact rate lets you break loose rusted nuts without snapping them, and we test each unit on a torque rig before it ships to make sure three settings (150, 250, and 350 NM) actually hit their marks within a tight tolerance.

The 1/2-inch square drive is standerd for automotive work, and you'll get roughly 1500 to 2300 RPM depending on how far you squeeze the trigger, but the real trick is the battery compatibility — our company offer 2.0Ah up to 6.0Ah packs, and the 4.0Ah is what most buyers go with for a full day of heavy use without swapping.

CE cerification covers teh electrical safety side, but we also run HPLC on the lithium cells for batch consistency (usually 2-4 weeks lead time), and if a COA shows anything off from the spec sheet, we'll retest the whole batch at no charge — that's a policy we've had for about three years now.

Charging takes 60 to 90 minutes depending on the pack size, so you'll want a spare battery if you're running it hard on a line, and the ergonomic grip is actually better than most competition for reducing hand fatigue during long sessions of repetitive fastening.

We usually have stock on the 2.0Ah and 4.0Ah models, but the 6.0Ah can take 20 days or so if demand is high, so confirm lead time before ordering if you need a specific capacty.