Account
Inquiry
We've been shipping these to home users for a while now, and what it does is create those micro-channels that basically trick teh skin into repairing itself—collagen production ramps up noticeably after a session or two, and most people see improvement in fine lines and texture within about 4 weeks or so.
adjustable needle depth form 0.25mm to 3.00mm is the key spec here, and you can swap between 12-pin, 36-pin, or 42-pin cartridges depending on what you're treating—deeper settings for tougher scars, shallower for delicate areas like around the eyes (but honestly, don't push past 1.5mm at home unless you're confident).
It runs at 6000 to 12000 RPM across 5 speed levels, and the whole device weighs only 56 grams, so it's pretty much lighter than most competitors—you'll find it easier to hold steady for longer sessions than the bulkier units some supliers push.
We usually have these in stock, but the disposable needle cartridges are what you'll need to reorder regularly; the device itself is rechargeable via a 5V 1000mA cable, and we include that plus a manual in the box.
Medical-grade stainles steel on the needles means less risk of irritation compared to cheaper alloys, and we've had buyers mention the 42-pin cartridge works better for suface-level texture rather than deep scar work—just a heads up if you're targeting stretch marks.
Lead time is typically 2-3 weeks for most orders, and we can provide COAs on the needle batches if your protocol requires it—the MOQ is 50 units for the device alone, but our company can mix cartridges in the same shipment to hit that number.
Yes, all three needle types are interchangeable with this device. The 12-pin is best for precision work like around the eyes, while the 36- and 42-pin cover larger areas faster.
We don't have a strict minimum for this model — you can order a single unit. If you're buying in bulk, we can offer volume pricing on request.
Yes, we can supply a material certificate for the stainless steel needles. The cartridges are sold sterile, and we can share sterilization batch records if needed.
Standard lead time is 3-5 business days for single units. For bulk orders with custom packaging, expect 10-15 days depending on your design requirements.
Keep the device in a cool, dry place away from direct sunlight. Store unused needle cartridges in their sealed packaging to maintain sterility until you're ready to use them.
