Account
Inquiry
Most clinics we've dealt with end up replacing those older hydraulic chairs within two years — the HY-F3 runs on a 24V DC motor system that's noticeably quieter and smoother, and it's got 9 programmable memory positions you can set for different procedures, which basically saves you from constantly readjusting between patients.
It takes up about 145 by 106 by 125 centimeters of floor space and weighs 280kg, so you'll want to check your doorway clearance before ordering, and height range goes from 380mm to 820mm, which works well for both seated and standing work, though it's not ideal for mobile clinics or temporary setups.
Teh KY-G LED cold light is actually pretty good for surgical work — it doesn't heat up the patient's face during long extractions, and we usually have these in stock, but confirm lead time if you need more than 5 units, as it's typically 20 days or so for larger orders.
We've seen some buyers try to save by going with cheaper units that lack the digital touch panel, and they usually regret it within six months when the mechancial controls start wearing out, so the 2-year warranty is something most people take as a given.
Power supply is 220V at 50Hz, and air pressure needs to be between 0.5 and 0.8MPa with water pressrue at 0.2 to 0.4MPa — pretty standard for most dental clinics, but you'll want to verify your compressor specs before installation.
The HY-F3 requires a 220V-50HZ power supply, water pressure between 0.2MPa and 0.4MPa, and air pressure between 0.5MPa and 0.8MPa. Make sure your clinic setup matches these specs before installation.
Yes, the HY-F3 comes with ISO9001 and ISO13485 certifications. We can include copies of these quality documents with your shipment upon request.
Our MOQ for the HY-F3 is typically 1 unit, so you can order just one for a single clinic. For larger orders, we can discuss volume discounts.
The KY-G LED cold light is integrated into the HY-F3 package, but it's adjustable for positioning. If you need a different surgical light model, let us know and we can check compatibility options.
The HY-F3 is packed in a strong wooden crate to protect the 280kg unit during transit. Store it in a dry, indoor area between 10°C and 40°C, away from direct sunlight and moisture.
