Professional Dental Chair Unit TJ2688 C3 with Electric Valve Control for Dental Clinics

So for a single unit, you're looking at roughly $4,800, which drops to about $4,200 each if you order 5-10, and once you hit 20 units or so our company can talk about $3,800 per chair—that's the bulk tier where the real savings kick in, and most clinics start there.

What it does in practice is handle the full patient setup without you having to fiddle with separate valves or manual adjustments, because the electric valve control lets you program the chair height from 440mm to 860mm and teh angle form 5° to 85° with just a touchpad—basically, one tap gets the patient where you need them, and the automatic thermostatic water system keeps the spittoon at a steady temp.

for instalation are the water pressure range of 0.2MPa to 0.4MPa and air pressure above 0.55MPa, which is pretty standerd for most clinics, but you'll want to check your lines before ordering because we've had buyers who had to add a booster for older buildings.

Where it fits is in mid-sized to busy dental clinics, especially those that see both adults and kids since the headrest has pediatric options—it's not really suited for mobile setups or very small operatories because the unit itself takes up about the same floor space as a typical dental chair, give or take.

Also, we usually have stock on the 110V version, but the 220V model might need a 20-day lead time or so, and the warranty is one year from delivery—though I'd recommend ordering an extra touchpad if you're running multiple chairs, as that's one part that gets the most wear.