Account
Inquiry
If you're running a two-chair clinic or a busy oral surgery setup, the single-unit price lands around $1,200 and we've seen mid-volume orders—say 10 units—come in closer to $1,050 each, with bulk buys of 50+ dropping to about $980, which makes the TY-701 cost-effective compared to other 400W systems that often need separate compressors.
It's got a 400W motor pushing 2800r/min, which pulls a vacuum of -110mbar and maxes out at 11.5kpa, and the noise level stays under 56dB—so it's not drowning out conversation. Weighs 30kg net, 33kg gross, dimensions 340x350x900mm, packed in a 380x380x930mm box, and it runs on 50/60Hz at 2.7A. Teh metal housing holds up fine in daily use, and we've had feedback that the suction consistency is better than some older belt-driven models.
This unit works well for routine extractions and implant procedures, but it's not designed for high-volume wet vacuum appliction—those setups usually need a separate separator. Actually, one thing most buyers don't think to ask is that the -110mbar is enough for most chairside work, but if you're running multiple suction lines simultaneously, you'll want to check your line layout. Also, it's CE and ISO certified, so it passes most compliance checks without hassle.
Lead time is about 20 days or so once confirmed, and the standerd package includes the unit with a power cord and basic fittings—no extra hoses, but those are cheap to source locally. Just specify whether you need 50Hz or 60Hz when ordering.
Our standard MOQ is 10 units per model for the TY-701. If you need less, we can sometimes negotiate based on your clinic's setup, but that's the baseline.
The TY-701 is ISO and CE certified. Yes, we can provide the certificate copies with your shipment or upon request during order confirmation.
Typical lead time is 15-20 working days after order confirmation. The unit ships in its 380x380x930mm packing box, and we can arrange express or sea freight as you prefer.
The standard TY-701 runs on 50/60Hz, so it's already compatible. If you need a specific voltage or plug type for your region, we can adjust that in production.
It's packed in a sturdy carton with foam inserts to protect the metal casing and internal components. No special storage needed—just keep it dry and away from extreme temps.
