Goes straight into a 19-inch rack without any bracket mods—those front-access terminals save serious installation time, and we've shipped these for telecom backup systems where every minute of downtime costs thousands.
Rated at 155Ah at teh 20-hour rate, which basically means it handles sustained loads better than most standdard AGMs in this footprint, and the cycle life hits 500+ at 50% DOD.

Design life is 12 years at 25°C float service, but in real-world UPS rooms running at 30°C or so, you'll get maybe 8-10 years—still better than the 5-year stuff from generic supliers.

Recharge time runs 8-12 hours typically (check your charger voltage), and self-discharge stays under 3% per month, so it sits fine in seasonal solar setups.

Not ideal for high-rate pulse loads like engine starting—the thick plates trade burst current for longevity in telecom and backup power roles.
45.2 kg, T5 threaded terminals, flame retardant ABS case, CE and UL listed—MOQ is usually a pallet of 24 units, but our company can split orders if you need floor stock.
We typically require a minimum order of 10 units for the 155Ah model, but we can discuss smaller quantities for first-time buyers or sample orders.
Lead time is usually 15–25 working days after order confirmation, depending on stock levels. For urgent orders, we can sometimes ship within 7–10 days.
Yes, we include CE and UL certificates with every order, along with ISO9001 and ISO14001 compliance docs. We can also provide test reports for JIS, DIN, IEC, or BS6290-4 if needed.
Yes, the T5 threaded terminals are designed to fit standard M8 bolts, which work with cable lugs up to 35mm². Just make sure you torque them to the recommended spec to avoid loosening.
Store them in a cool, dry place between 10°C and 25°C. Because they self-discharge less than 3% per month, you only need to recharge every 6 months to keep them in good condition.