Account
Inquiry
Runs off standard three-phase 380V, pulls 13 amps at full load, and you're looking at a 60% duty cycle at 315 amps which is enough for most production shifts without overheating. The inverter tech keeps it light at 20kg, so moving it around the shop floor isn't a backbreaker, and air cooling system is pretty much maintenance-free compared to water-cooled units.
We've had these go out to small fabrication shops and larger assembly lines, typically for mild steel MIG welding with 0.8 to 1.0mm wire, and the AFTT circuit stops that annoying wire tip balling after you release the trigger. The digital display shows voltge and current clearly, but you don't need to fiddle with external settings—it's all right there on the panel.
One thing we notice is the spatter control is better than older inverter models, thanks to the double waveform regulation, though it's not ideal for aluminum or thin-gauge sheet metal work—stick to steel with this one. The integrated wire feeder has a straightening mechanism built in, which saves you from buying a separate push-pull setup for most jobs.
CE, ROHS, and ISO certs are in place, and we usually ship these within 10 working days or so, but confirm lead time if you need a large batch—MOQ is typically 5 units for stock orders. Each machine comes with a standard COA, and the insulation class is F, so it handles higher ambient temps without derating too much.
Basically, if you're doing continuous MIG welding in a workshop or light indutrial setting, this unit covers the 15-315 amp range and weighs about the same as a decent toolbox. The dimensoins are 275 by 490 by 550mm, so it'll fit under most benches or on a cart without taking up too much floor space.
Our MOQ is 10 units, but we can sometimes negotiate for trial orders — just reach out and we'll see what we can do.
We usually ship within 15-20 working days after order confirmation, depending on stock levels. For larger orders, we'll give you a more precise timeline.
Yes, it's certified with CE, ROHS, and ISO. We can provide copies of the certificates upon request.
It's specifically designed for Φ0.8-1.0mm wire, so using other sizes might affect performance or damage the feeder. Stick to the recommended range for best results.
Keep it in a dry, clean environment away from moisture and dust. Since it's air-cooled, make sure the vents aren't blocked during storage to avoid overheating when you fire it up.
