Account
Inquiry
The real standout here is the 120mm waist bridge lift — that’s usually what catches a buyer’s eye first because it gives you that extra spinal support during fracture reduction, and we’ve seen it make a tangible difference in how smoothly a procedure goes.
You’re getting a 1-year warranty with it, CE and FDA certs are both in place, and the steel frame means it’ll hold up through years of daily use, but honestly most buyers go with the adjustable table length version because of that it’s more for different patient sizes, from children to adults, though the manufacutrer’s spec says “group children” so we usually suggest confirming your primary use case with us first.
Minimum height is 670mm or so, which is pretty standard, but the tilt range — front/back 30°/25°, left/right 20°/20°, with head panel adjustments going up 60° and down 75° — that covers just about every surgical position you’d need for a manual orthopedic surgery, though it’s not ideal for trauma cases where you need motorized height changes between procedures.
What it basically does is keep the patient stable while you work, and the back panel goes up 70° and down 30°, so for something like a spinal fusion prep or a leg fracture set, you can really dial in that angle without having to reposition the whole table, and the leg panel adjustment runs from 15° up to 90° down, which is handy for hip surgeries.
4 to 6 weeks is a typical lead time for a custom color order — we usually have about 50 units or so in standard gray, but if you need something specific, just let us know and we’ll confirm the exact timeline; the MOQ is generally one unit, and the power source is purely mechancial so there’s no batteries or cords to fuss with.
You’ll want the COA form the batch we send you — it’s a Class I instrument anyway, so the risk profile is low, and with ISO13485 on top of it, the quailty documentation is all there if your audits ever need it, but just keep in mind that for some specialized fracture tables, the leg panel adjustment going down to 90° is a tight tolerance compared to a lot of standard models.
MOQ is typically 1 unit for sample orders, and 10 units for bulk. Lead time is around 15–25 days depending on quantity and color customization.
Yes, we include copies of CE, FDA, and ISO13485 certificates with every shipment. You can also request them before placing an order.
Color customization is available at no extra cost for bulk orders. For single units, there may be a small setup fee.
The steel frame supports up to 200 kg (440 lbs) for standard use. The adjustable sections maintain stability within that limit.
It's packed in a sturdy plywood case with foam padding inside. All moving parts are locked and wrapped separately to avoid scratches or bending.
