Account
Inquiry
We usually keep about 20 units in stock at the Shenzhen warehouse, so lead time is typically 10-14 days if you need a couple of units — for larger orders, say 50 or so, confirm lead time because we may need to build them. system comes in a single export carton, roughly 35kg, with foam inserts and no cold chain issues, so shippng is straightforward.
The 5.4 inch TFT shows presure-time and frequency-time waveforms, and you can cycle through views with the touchscreen easily — most buyers don't bother with the manual after the first use. IPPV, SIPPV, SIMV, and MANUAL modes cover pretty much anything from routine spay-neuters to ICU ventilation, though if you're dealing with very small rodents under 1kg, the 50ml minimum tidal volume might be too high, so it's not ideal for that. You should also know the backup power runs for about 4 hours, which is enough for most surgeries but not a full ICU shift.
The gas supply needs 0.32-0.6MPa, and the flowmeter goes from 0.1 to 10 L/min for both O2 and N2O — the dual vaporizer slot (single or double PA-I type) means you can run isoflurane and sevoflurane simultaneously if that's your setup. Actually, the oxygen failure alarm is a standard safety feature, but unlike some cheaper units, it kicks in fast — we tested one at 0.25MPa and it triggered within 2 seconds.
We've seen these units used mostly in small animal clinics for cats and dogs up to about 40kg (the 1500ml max tidal volume handles that), but some buyers use them for rabbits and ferrets at the lower end of the respiratory frequency range — 1-99 bpm gives you flexibility. The metallic modular circuit holds up well to repeated autoclaving, unlike the plastic ones that warp after a dozen cycles, so it's better than reagent grade for this applicaion, frankly.
Shelf life is listed as 2 years from manufacture, but that's more about the vaporizer seals than the electronics — we've had units sitting on the shelf for 3 years that still passed calibration, so take that with a grain of salt. Anyway, if you need CE and ISO13485 paperwork, we include COAs with every unit (typically within 2-3 business days after order), and the manual covers the I:E ratio range form 4:1 to 1:10, which is tighter tolerance than most small animal machines.
We typically require a minimum order of 10 units for first-time buyers, but we can discuss a lower trial quantity if you're setting up a new clinic. Just reach out to our sales team.
Standard lead time is 15-20 working days after order confirmation. Yes, we ship worldwide via air or sea, and we'll handle all the export paperwork.
Absolutely, the HL-AM-01B is CE and ISO13485 certified. We'll include copies of both certificates in the shipping package, and we can email them ahead of time if needed.
The system accepts single or double PA-I type vaporizers, which are compatible with isoflurane, sevoflurane, and halothane. Just specify your preferred agent when ordering.
Store it in a clean, dry room with temperatures between 10-40°C and humidity below 80%. No special conditions needed, but avoid direct sunlight and heavy dust.
