Account
Inquiry
Actually scrubbing intricate lab glassware or surgical tools by hand leaves contamination in blind cavities and deep holes every time, so what you need is cavitation that gets into those geometries without you touching teh instrument.
We've got four capacity options—10L, 15L, 22L, or 30L—and ultrasonic frequency switches between 60kHz, 80kHz, and 120kHz on a digital LCD, so you dial in gentle or aggressive cleaning for different batches without swapping any hardware.
The 304 stainles steel inner tank and 500W heating element handle temps up to 80°C, and the timer runs 0-99 minutes; noise stays under 70dB, which matters if this sits on a bench near people.
These don't work well for large industrial parts or continuous-flow setups—it's a batch machine for precision environments like labs or dental clinics, basically.
Each unit ships with a lid and washing basket ready to run, but check lead time on the 30L model since we usually have stock for 10L and 15L faster.
Most buyers go with the 60kHz setting for routine glassware and bump to 120kHz for delicate optics; pulling 240W to 600W depending on model, so factor your electricla load.
We've got four models: UW-10 gives you 10L, UW-15 is 15L, UW-22 is 22L, and UW-30 is 30L. Choose based on the volume of lab equipment you're cleaning.
You can select the frequency—60kHz, 80kHz, or 120kHz—when placing your order, but it's fixed on the unit you receive. Just let us know your preference, and we'll set it up accordingly.
It's CE and FDA certified. We'll include the certification documents with your shipment, so you're covered for lab compliance.
MOQ is typically 10 units per model, and lead time is around 15-20 working days after order confirmation. We can be flexible on larger quantities though.
Yes, both the inner tank and the outer body are 304 stainless steel. It's corrosion-resistant and handles the 80°C max temperature just fine for standard lab solvents.
