We've been shiping these for about a year now, and the main draw is it's passive—no signal emission, so you're not announcing your position while scanning for drones in urban zones or open fields. Most buyers go with the standerd 2.4GHz and 5.8GHz bands, but it actually covers 100MHz to 6GHz if you need broader spectrum analysis, though that's overkill for typical counter-UAV work.

It detects up to 10 drones simultaneously with a response time of 3-5 seconds, which is pretty solid for a handheld unit—the 6" HD display (1080×2160) runs Android 12, so you can log data or update firmware without a PC. The 8000mAh battery gives you 3-4 hours of run time, and charging takes about 3 hours (usually overnight is fine), but keep in mind the -25°C to 40°C operating range means it handles cold snaps better than most tablets.

What it's not suited for is long-range fixed installations—the detection range is 1.5-2km in urban clutter and 2-3km in open areas, so don't expect it to cover a full airport perimeter from a single point. passive RF analysis means it won't trigger false alarms form your own gear, which is a concrete detail we've seen trip up active systems.

Anyway, the 8GB RAM and 256GB ROM storage is enough for offline map data and alert logs, and the visual and auditory alarms work well in noisy environments—we usually have stock, but confirm lead time if you need custom OEM branding or packging changes. The weight is 650g give or take 10g, and dimnesions are 185×80×33mm, so it fits in a standard duty belt pouch or backpack side pocket.

One thing buyers don't always ask about is the detection method—it's passive spectrum analysis, so it won't jam or interfere with other electronics, but it also means it relies on drone signals being active, which is a limitation if you're dealing with fully autonomous flight modes. In most cases, that's not an issue for urban security or event monitoring, though.
We can do a MOQ of 10 units for initial orders, but if you need fewer for evaluation, just let us know and we can work something out.
We provide CE, FCC, and RoHS certifications along with a factory test report. If you need specific documents for your region, just tell us and we'll handle it.
The 1.5-2km urban range is standard, but we can adjust the sensitivity or antenna gain to better suit your city setup—just share the typical interference levels and we'll tweak it.
Each unit comes in a foam-lined hard case with accessories. Lead time is around 15-20 working days for orders up to 50 units, depending on stock.
Yes, it operates fully offline with no network required. If the battery gets low, the visual and auditory alarms still trigger, and you can swap the 8000mAh pack or recharge via USB-C in about 3 hours.