Customizable Straw Bale Grinding Equipment with CE & ISO Certification for Feed Production

Most large-scale feed operations we deal with are running alfalfa or corn stalks through this at 20 tons an hour, and what it does is it lets you dial in the grind form 3 to 20 cm depending on what your livestock need—the adjustable screen mesh with 6-125 mm holes is pretty much the key there.

The hydraulic motor with chain transmission handles the heavy lifting, and we've had these running for years in high-moisture conditions without major issues, though you'll want to check the lead time on the power customiztion since that's not always off the shelf—usually 20 days or so for that.

It's 5300 kg of steel, 6500×3200×3200 mm, so make sure your floor can take the weight before you order, and the 2-year the drive system but not wear parts like teh hammers or screens obviously.

Actually, one thing buyers don't always think about is that the hydraulic drive means you can reverse rotor to clear jams without climbing inside, which saves a lot of downtime on wet grass bales.

Anyway, the OEM service is available if you want custom branding, but most guys just take the standerd model and add their own paint—it's not suited for grain or hard seeds though, that'll chew up the screens faster than you'd think.