Account
Inquiry
You're stuck trying to get under something that's barely off the ground, and a standard jack won't fit—we've been there, and that's basically what this claw jack solves with its minimum hook height down to 16mm on the smaller models.
These run from 5 tons to 50 tons, with the top lifting matching that capacity and the hook side handling half that—so a 50T unit lifts 25 tons on the hook—and stroke ranges from 115mm to 158mm give or take, depending on which model you pick.
The handle rotates a full 200 degrees, so you're not locked into one stance; you can work it from pretty much any angle, which matters in tight indutrial spots. It's manual hydraulic, meaning no power needed, but the trade-off is it's slower than electric—most buyers go with the 20T for general machinery maintenance, as it's a decent balance of capacity and portability.
Overload protection is built in, and the base is electrically welded steel, so leaks aren't a thing you'll deal with often, though we usually have stock on the 10T and 20T models. Temperature resisance is fine for most environments, but don't push it beyond -20°C or so without checking with us first.
OEM and customization are avaliable if you need a different color or minor spec tweaks—lead time for that is roughly 30 to 45 days, while standard orders ship in about 2 weeks for quantities under 50 units. Certifications include CE and ISO 9001:2000, and our company offer a 2-year warranty, but confirm bulk pricing with your quantity as it varies.
The minimum hook height on the 50T is 50mm, which is low enough to slide under most machinery. That's key for tight spots where you don't have extra clearance to jockey the jack into place.
Yes, we offer OEM/ODM customization, so we can adjust handle length or other specs to fit your setup. Just let us know your requirements when you place the order.
Typically, standard models like the 20T ship within 15-20 working days after order confirmation. If you need it faster, we can check our current stock.
Yes, every model from 5T to 50T includes overload protection, and it's CE and ISO 9001:2000 certified. The valve is calibrated during production to kick in at the rated load limit, so no extra paperwork is needed per unit.
The 50T comes in a heavy-duty wooden crate for export, with oiled surfaces to prevent rust. It's fine for short-term outdoor storage if covered, but for long-term, keep it indoors to protect the hydraulic seals.
