Account
Inquiry
You can dial this form 80 to 150 bar depending on what you’re blasting, and the 10-15 L/min flow is pretty generous for a home unit — we usually see buyers running it for patio cleaning or stripping old paint off garden furniture. copper pump head handles the heat better than the aluminum ones, so it’s less likely to seize if you push it hard for 20 minutes straight.
220V at 4.5A is standard for most household circuits, so you won’t trip a breaker unless you’ve got something else heavy on the same line. That 7m outlet pipe gives you enough reach to walk around a midsize SUV without dragging the machine, and the 1.8m inlet is short enough that you’ll need a bucket or a hose bib nearby.
The round water column nozzle is fine for focused stripping but don’t expect a fan spray pattern — you’ll get a tight stream, roughly 8-12 meters of effective distance depending on pressure setting and nozzle wear. Most buyers go with the 10mg... sorry, wrong spec — most go with the higher pressure setting for concrete stains, but it’s actually better suited for painted surfaces at the lower end.
CE, CB, ETL, RoHS, and UR certifications are stamped, so it’s cleared for most markets including North America and Europe — but check your local electrcial code because the plug type might differ. The pump can take inlet water up to 40°C, which basically means don’t hook it up to a hot water tank or you’ll wreck the seals within a few cycles.
Packaging comes in a portable box inside a carton, dimensions 41x21.5x37cm, so it fits in a car trunk or a standard shelf. MOQ is usually 50 units or so for direct orders, but our company have smaller lots avaliable through distributors — confirm lead time because the copper head supply has been unpredictable lately.
It’s not suited for continuous commercail use on a construction site — the plastic+metal composite housing won’t take daily drops from a ladder, and the motor drive isn’t 8-hour shifts. Warranty is 1 year, which is typical for this price bracket, and you’ll want to flush the system with clean water after every use if you’re drawing from a pond or rain barrel.
Our standard MOQ is 500 units per model, but we can sometimes negotiate smaller trial orders depending on stock availability — just reach out to our sales team.
Typical lead time is 25-30 days after order confirmation and deposit, but we can expedite to 15-20 days for urgent orders if stock is available.
Yes, it's certified with CE, CB, ETL, RoHS, and UR — all documentation is available on request for your compliance checks.
The PF-EP322 has an adjustable pressure range of 80-150 Bar, and water flow varies between 10-15L/min depending on the nozzle and setting. The round water column nozzle gives you a focused stream for tough dirt.
Yes, the pump head is solid copper — that's a key factor in its durability and resistance to corrosion, which extends the washer's lifespan compared to aluminum heads.
