Account
Inquiry
It's not the lightest unit you'll move around at 81.5 pounds, but that steel frame and axial cam pump are built to take commercail abuse without complaining. 2. Basically, the 7HP 170F engine spins at 3400 RPM to push 2600 PSI at 9 liters per minute — enough to strip paint or knock caked mud off heavy equiment in most cases. 3. You get five quick-connect nozzles (0°, 15°, 25°, 40°, and soap) with a 25-foot hose that resists kinks pretty well, and built-in detergent tank lets you apply chemicals directly through the wand. 4. One thing we've noticed handling these is the thermal protection kicks in before you cook teh pump on long jobs — a detail most buyers don't ask about but appreciate later. 5. It ships with a Euro V compliant engine (check your local regs) and a 1-year warranty, and we usually have stock but confirm lead time for bulk orders.
It has CE and Euro V certifications, so it's fully compliant for commercial use in Europe. No extra paperwork needed for most job sites.
We typically require a minimum of 5 units per order for this model, but we can discuss lower quantities for first-time buyers or sample orders.
Yes, it comes with five nozzles: 0°, 15°, 25°, 40°, and a soap nozzle. Use the 0° or 15° for tough grease, and the 25° or 40° for general rinsing.
Standard lead time is 15-20 working days after order confirmation for bulk orders. We can expedite if stock is available.
It uses SAE 10W-30 engine oil, and the oil capacity is 600ml. Change the oil after the first 20 hours of use, then every 100 hours or seasonally.
