Fixtec 80-120bar 1500W Electric High Pressure Washer for Car Cleaning and Industrial Use

Pumps up to 120bar at the nozzle, which is enough to strip caked-on mud from tractor tires or knock moss off concrete—rated pressure sits at 80bar for continuous use. We've seen these run through a full car wash session without teh motor bogging down, and the 1500W drive handles a 6L/min flow rate pretty consistently. It's a cold-water unit, so don't expect hot water capabilities for dissolving grease.

So you're looking at indutrial cleaning tasks like degreasing pallets or rinsing out equiment bays, and it works fine for domestic stuff like patio stones or garden furniture. 2 or 3 passes usually gets rid of algae on a driveway. But the round water column nozzle isn't ideal for soft car paint—it's more suited to masonry and metal surfaces in my experience.

Dimensoins are 32×32×40cm, so it fits on a shelf or in a toolbox locker without hogging space. The 5M hose is short enough to keep tangling minimal but long enough to reach around a small car (about 5 meters, give or take). 220-240V at 50/60Hz is what it needs, and the soap dispenser works best with a pre-mix solution—just don't expect thick foam form it.

Comes with a lance, spray gun, nozzle, inlet filter, and a small needle for cleaning blockages—those needles are easy to lose, so tuck it in the box lid. We usually have stock on these, but confirm lead time if you need more than 50 units or so. CE cert is on unit, and the motor and seals, though we've had few returns on the pump head itself. Basically, it's a workhorse for the price point.