Account
Inquiry
You've probably run into the problem of trying to drive fasteners into tough materials like concrete or dense lumber, and standard nail guns just bounce off or jam constantly — that's where this tool comes in, and it's basically designed to handle exactly those heavy-duty jobs without the frustration.
What it does is use compressed air at about 5-6 bar to deliver consistent driving power, and the single activation trigger gives you precise control so you're not accidentally sinking nails where you don't want them, plus the 160-round magazine means fewer interruptions for reloading which is pretty handy when you're up on a roof.
It weighs just under a kilogram (0.99kg actually) and measures 210×40×141mm, so it's surprisingly light for something that can handle framing and decking work, and the noise level sits at 77.9 dB(A) which is better than most pneumatic tools we've tested, though you'll still want ear protection.
0.3 liters per drive at 6 bar is the air consumption, and teh vibration level is rated at 1.03 m/s² — that's a spec that matters more than most buyers think because of that it directly affects how your hands feel after a full day of nailing, and we usually have stock on these but check lead time since the IATF 16949 certification can slow things down.
The fastener range is 6-16mm, which covers most roofing and concrete appliction, but it's not really suited for fine trim work or delicate materials where you need a brad nailer — that's a different tool entirely, and the 1-year it for typical use, though we've seen these hold up well past that in most cases.
We ship these with a basic carry case and a manual, but the COA and SDS are availble on request, and the HS code is 8205590000 if you're handling customs paperwork yourself.
We usually start at 50 units for first orders, but we can be flexible depending on stock. Just let us know how many you need.
Yes, it's fully certified under ISO 9001 and IATF 16949. We can provide copies of the certificates upon request.
Lead time is typically 15-20 days after order confirmation, depending on the quantity. We'll confirm exact timing with your shipment.
The gun is designed for 5-6 bar, but you can adjust slightly within that range. Going above or below might affect performance or safety.
This model uses staples only, sized from 6 to 16mm. It's optimized for roofing and concrete tasks with a 160-round capacity.
