Account
Inquiry
Sample pricing starts at $8.50 for the 6-inch, $12 for the 10-inch, and $18 for the 12-inch—mid-volume orders of 500 units or so drop to about $6.50, $9, and $13 each, and bulk buys of 2000+ push it down further to roughly $5, $7, and $10.50 respectively, all FOB.
Basically, it's a heavy-duty chrome vanadium steel adjustable spanner with laser-etched scales and an ergonomic thickened handle that gives you better torque without slipping, and the worm mechanism uses cold rolling so it's smooth as hell—actually, most buyers go with the 10-inch because it covers 90% of jobs.
The end hole doubles as an offset spanner, which is pretty handy when you're in a tight spot, but it's not suited for precision electronics work since the jaw capacty is extended—a 6-inch can replace an 8-inch wrench, but you lose some fine control.
We usually have stock on 8-inch and 10-inch models, but the 12-inch might need a 20-day lead time or so depending on the suface finish (chrome-plated or black nickel), and we can do mixed sizes in one MOQ of 300 pieces.
One thing you don't always think about: the black nickel finish hides scratches better than chrome, but it's a bit pricier by about $0.80 per unit in bulk, and the laser etching doesn't fade even after years of use.
Anyway, dilevery is typically 30-45 days for a full container, and our company provide COA with every batch—just confirm the size range you need and the volume, and we'll send the exact tier pricing.
The jaw capacities aren’t listed in the specs, but typically a 6'' wrench opens to about 0.8'', an 8'' to about 1.1'', a 10'' to about 1.3'', and a 12'' to about 1.5''. If you need exact numbers for your application, just ask and I can double-check.
Our standard MOQ for the GWB-3 is 500 pieces per size, but we can mix 6'', 8'', 10'', and 12'' in a single order to hit that total. For smaller runs, let me know your target quantity and we can discuss options.
Yes, we supply TUV/GS and JIS certificates along with the packing list for every order. If you need them in advance for approval, just reach out and I’ll email the copies.
The scale is laser-etched into the chrome vanadium steel, so it won’t rub off or fade with normal use. I’ve seen these hold up well even after years in a toolbox.
Yes, the end hole is designed to work as an offset spanner—it fits common bolt sizes like M8, M10, or M12 depending on the wrench size. For example, the 10'' model’s end hole typically matches a 15mm or 17mm bolt head.
