Account
Inquiry
We’ve been using these SC/APC pigtails for fiber distribution frames for about six months now, and they basically handle everything we throw at them without fuss.
Insertion loss stays under 0.2dB, and return loss usually hits at least 55dB—we checked about 30 units form the first batch and they all came in within that window, give or take.
They work across 1260-1650nm for the operating wavelength, so there’s no issue with either single-mode or some multi-mode setups we tested, but honestly the tight bend radius with G657A1 fiber is where this thing actually shines in tight conduits.
For FTTH or FTTX networks, these are solid; what it does is keep signal loss minimal even when you need to route around corners or through cramped splice trays, though they’re not really ideal for outdoor direct burial without additional protection.
We’ve got teh 3.0mm cable version with yellow boots—easier to spot in a crowded patch panel than you'd think—but there’s also a fluro-like LSZH jacket option for plenum spaces if that’s your thing.
The MOQ on custom color or boot type is usually around 500 pieces or so, but we typically just order the standerd blue and green for SM and APC polarity marking because that’s what most buyers go with anyway.
We typically start at 100 pieces per type, but if you need fewer for a trial run, just let us know—we can often work something out.
Yes, we include the test data for insertion loss (≤0.2dB) and return loss (≥55dB) with each batch upon request. It's standard for our ISO9001 and ROHS certified production.
Absolutely—we offer PVC, LSZH, OFNR, OFNP, and Hytrel jackets. Just specify LSZH when ordering, and we'll match the cable diameter you need (0.9, 2.0, or 3.0mm).
For standard colors like yellow, blue, or green, we ship within 5-7 working days. Custom colors may add about 3-5 days depending on the volume.
Yes, they work with G652D, G657A1, and G657A2 fiber types. If you need G657A2 for better bend performance in cramped spaces, just select that option when ordering.
