Account
Inquiry
When you're running fiber to a distribution frame or networking gear that sits in less-than-ideal environmental conditions, the usual ST or MT-RJ connectors just aren't built to resist moisture ingress or the corrosive byproducts of —that's the core problem these solve, basically keeping signal integrity intact where standard parts would fail within months.
We've used a PBT PA66 PA46 housing with a UL 94V-0 rating, which handles flame retardancy better than most commodity plastics, and phosphor bronze contact terminals get a 0.46mm diameter with gold plating over nickel to keep contact resistnce at 30mΩ max—pretty tight tolerance for a molded part, especially since the current rating sits at 1.5A and voltage at 125V AC RMS.
The ferrule endface is PC(UPC) with a multimode transmission medium, an MT-RJ structure, and multi-core configuration—so you're not getting single-mode precision here, it's really aimed at multimode LED-based systems where insertion loss and return loss are less critical than assembly speed and durability, and it handles roughly 750 cycles minimum before you see any degradation.
Insulation resistance is spec'd at 500mΩ minimum under 500VDC, but honestly that's a conservative number—we usually see it holding well above that on HPLC-tested batches, and teh operating range of -30°C to +85°C covers most indoor or sheltered outdoor racks without needing active temperature control.
Lead time runs 7-10 days for standerd orders, tray packed, and our company can do small orders or OEM service without a hassle—just be aware the molded fabrication process means tooling changes add about 20 days or so if you need a custom square shape or different core count, and we recommend a quick COA check for any batch above 500 units.
We don't have a strict MOQ. Small orders are welcome, so you can start with just a few pieces for prototyping or testing.
Yes, the housing material meets UL 94V-0 flame retardant rating. We can provide the UL certification document upon request.
Our standard lead time is 7-10 days for most orders. If you need custom colors or specific packaging, it might add 2-3 days.
Yes, we can adjust the gold plating thickness on the 0.46mm phosphor bronze terminal per your specs. Just let us know the exact requirement.
They come in tray packing, which keeps the connectors separated and protected during transit. For larger quantities, we can also do bulk packing if preferred.
