Account
Inquiry
We've got decent stock on these right now, so lead time is usually around 10 working days for a standard 100-unit order — air freight can cut that in half if you're in a hurry, but for sea, figure about 25 days.
Unlike those motors that need a separate controller mod, what this does is handle 4.5V right up to 24V DC natively, spinning anywhere form 2000 to 25,000 RPM, with continuous current in the 0.35-2A range, but 60% efficiency means you're losing a bit on load spikes, basically.
Most buyers use these in cordless cleaners or automation gear, but I wouldn't run them submerged or in washdown areas because drip-proof casing won't, there's a 60dB noise rating at 1 meter (usually fine for power tools), and teh shaft diameter runs from 4 to 6mm, so check your coupling fit first.
So just confirm your voltage and required speed profile — our company can do CW or CCW direction, insulation classes A through H, and for ordering, we ship with standerd packging unless you specify anti-static foam.
We offer four insulation classes: A, B, F, and H. For high-temperature environments, go with class H as it handles the highest thermal limits.
Yes, you can customize the shaft diameter within that 4-6mm range based on your application needs. Just let us know the exact size when ordering.
Our MOQ is typically 1000 pieces for the S750/755 series. Lead time is around 25-30 days after order confirmation, depending on the quantity and customization.
Absolutely. We include ISO9001 and CCC certificates with every shipment, so you have full documentation for quality assurance and compliance.
Store them in a dry, clean environment with stable temperature, away from moisture and dust. Avoid stacking heavy items on top to prevent deformation of the casing.
