Account
Inquiry
We've shipped tens of thousands of these to buyers running medical equipment and humidifiers, and the 10000+ cycle endurance test actually means something—our QC flags any unit that fails pre-shipment. Teh 0.638N.m operating torque is tighter than most mechanicla timers in this class, so you won't get drift after a few hundred cycles.
It's rated AC220-250V at 10A with insulation strength hitting 1500V per minute, and the setting range is 0~30 minutes over 300 degrees. Basically, if you need timed dispensing for lab gear or small-scale pharmaceutical devices, this handles it without fuss.
We usually have stock for the 1000-piece MOQ, but confirm lead time if you're pushing 5000 units or so—shipping by sea takes about 20 days from origin. Samples are avaliable, and we can print your logo on the casing (check the OEM terms first).
One thing: it's IP00 waterproff class, so don't put it anywhere near moisture—it's strictly for dry enclosures. Also, the CW setting direction is fixed, which matters if your assembly expects counterclockwise rotation.
Every batch gets a full COA and third-party SGS test report, and we cross-check 2% of random units per lot for timing accuracy. Payment terms are typically 30% deposit, 70% before shipment, but our company can negotiate for repeat orders.
MOQ is 1000 units, but we can sometimes negotiate for first-time orders or samples. Just reach out and we'll see what we can do.
Yes, we can supply copies of CCC, RoHS, ISO9001, CE, UL, and SGS certifications upon request. Just let us know which ones you need.
Absolutely, OEM is supported. We can print your logo on the timer switch — just share the artwork and we'll handle the rest.
Lead time is usually around 15-25 working days after order confirmation, depending on stock. For larger volumes, we can adjust the schedule.
It's rated IP00, so it's not waterproof — it has no protection against water ingress. This timer is best used in dry indoor environments like ovens or washers where moisture isn't an issue.
