Professional 2200W Makute Electric Hammer Drill 65mm Chuck Size for Industrial Use

Comes in at a hefty 20kg with a 65mm chuck and 2200W motor, so you're trading lighter weight for real torque on concrete or rebar — the steel handle takes the abuse without flexing. It runs on 220-240V at 50-60Hz, no-load speed sits at 1500rpm, and we usually have stock, but confirm lead time if you need more than 50 units or so.

We run every batch through a standerd test protocol before it leaves Jinhua, checking for consistent no-load current draw and vibration levels across first 15 minutes of operation. The CE cert is current, but what matters more is that we've seen these hold up on anchor bolt installations where cheaper units stall out — you'll get a COA with each shipment if you ask for it.

Mostly used for demolition anchors, electrical conduit runs, and heavy-duty drilling into granite or brick — not ideal for light framing or drywall, that's overkill. 3. The packging is a metal box (71x17x31cm) that protects the unit in transit, though the gross weight hits 21kg so plan your shippng accordingly. Most buyers go with the 65mm chuck for versatility, but the 1500rpm limit means you're trading speed for impact force.

Actually, we've had a few customers retest units after 100 hours of run time with no drift in performance, which is better than reagent grade for this class of tool. If a unit fails within the first 30 days, we'll replace it — just send the unit back and we'll issue a retest report. The color is dark blue, and it's pretty much the same spec across batches, give or take a few grams on the handle weight.

Pricing beats most competitors by about 15% on per-unit costs, but that's base on bulk orders for construction sites in Europe — singles are tighter margin so we typically require an MOQ of 5 units or so. The net weight is 20kg, and the carton size is 71*17*31cm, so factor that into your freight costs.