Account
Inquiry
We're actually shiping quite a few of these with the 12" bar option lately—most people don't realize the 10" is better for tighter pruning, but the 12" gives you that extra reach for thicker branches, and Honda GX35 keeps it all running at 8500rpm without bogging down in heavy grass.
The engine displacement is 35.8cc, pumping out 1.0KW max power, but what really matters for daily use is the idle speed settling at 3000±200rpm so it doesn't stall when you're swapping attachments, and teh 0.6L fuel tank keeps you running for about 20 minutes or so of solid (usually enough for a couple of yards before refilling).
A buyer recently asked whether the pole saw worked on wet wood—I'd say you're better off letting branches dry out a bit before use the chain saw, since the 150ml oil tank runs through faster than expected in heavy, and the 762mm drive shaft (9 teeth on that one) transmits torque well but can be a bit stubborn to align if you rush the assembly.
Just so you know, the hedger attachment cuts 420mm per pass, which is actually pretty decent for shaping hedges, but the nylon blades on the brush cutter side tend to fray after about 5 sessions in thick brush—most folks keep a spare set handy, and we usually have stock but confirm lead time if you're ordering more than 10 units.
Package weight is a solid 18kg gross (handle with care on shipping), dimnesions run 1090x280x270mm, and while the MOQ might seem stiff at first, we've seen repeat orders from landscaping crews who just swap attachments instead of buying three separate tools.
Anyway, we're sitting on about 95 units in the warehose right now, and the key detail you didn't ask for but should know is the nylon cord specs—it's 3.2mm diameter stock but accomdate up to 4mm if you ream the heads slightly, which gives you a wider swath without losing speed.
