High Efficiency TT-M2600-2 Brush Cutter with 1.2kw Power for Lawn Care and Landscaping

We've been bringing these in for about three years now, and the 43cc two-stroke is basically what everyone wants for medium-duty clearing work — it's not the most powerful you'll find, but 1.2kw at 7500 rpm handles thick grass and light brush without bogging down. The adjustable blade system lets you swap between straight metal and other options depending on what you're that day; most buyers actually go with the standard straight blade for general use.

it come with a CDI digital ignition that fires up on the first or second pull usually, even after sitting for a couple of weeks in storage, which surprised me when we first tested them. Fuel mix is either 25:1 or 40:1 depending on your oil grade, and the 1-liter tank will give you about 20-30 minutes of continuous running time or so before you need to refill — longer if you're just edging along a fence line. The pump film carburetor does a decent job of keeping the idle stable once it's warmed up, but you might need to tweak the low-speed screw fresh out of the box.

The P-type handle with shoulder harness helps distribute teh 12.9kg nicely for someone working a half-acre lot or trimming roadside ditches — that's the 500-1000m² range they spec, though we've had rs use it for six hours straight on larger property without complaints about fatigue (just make sure they tighten the harness straps). What it won't do is cut through saplings or heavy woody brush over about an inch thick, so don't push it into briar patches and expect the engine to keep up — that's a job for a larger unit or a bush hog attachment.

Certified to CE, GS, EMC, MD and EU Stage V emissions, which matters for sellers shippng into stricter markets, though the actual noise level reduction they claim is relative — it's still a two-stroke, so you're not sneaking up on anyone. One thing we noticed is that forced air cooling works fine even in dusty conditions if you remember to clean the fins every few tanks; I've had a unit clogged after a partciularly dry season and the temp gauge started creeping on me.

They ship in a 5-layer brown export carton, gross weight 15.7kg with the 88cm shaft and straight blade installed, so expect to palletize them for LTL freight if ordering more than 20 units at a time — our MOQ is usually 50 units, but our company can do smaller trial orders depending on lead time (usually 2-4 weeks) for first-time buyers. Also, if you're looking at replacement blades, the standdard mounting pattern works with most universal brush cutter heads, but confirm compatiblity because we've had some cheap import heads with different bolt spacing that didn't fit right.