Account
Inquiry
We've got these in the warehouse right now, usually around 20 units ready to ship, though the 30L tank version moves faster than the standerd config — lead time is typically 7-10 business days if we need to build one to your spec.
It's built for cleaning building facades and solar panels up to 100 meters high, and spray pressure can be dialed from 750 to 3000 psi depending on what you're blasting. Basically, if you need to hit a glass curtain wall or concrete suface without scaffolding, this is the tool. It's not great for delicate historical masonry, though — the pressrue range is too aggressive for soft stone.
The frame is aviation-grade aluminum and carbon fiber, and one thing you'll notice if you've handled these is the arms fold down for transport — fits in the back of a standard pickup truck, which saves a lot of hassle. Flight time runs 10-15 minutes per battery, so you'll want at least two 14S LiPo packs (20000-28000mAh) to keep the shift moving.
We include a 1080P FPV camera in the remote controller, so you can see what you're spraying in real time, and the autonomous flight mode handles straight-line passes pretty well. Teh standard water tank is 30 liters, and the spray flow rate sits between 7.4 and 10 liters per minute — that gives you about 240 square meters of coverage per flight, give or take.
Cerification-wise, it's got CE, FCC, and RoHS, so it'll pass most site inspections without a problem. The main frame carries a one-year warranty, but the battery and spray pump aren't covered — that's pretty standard for drones in this class. We usually have stock, but confirm lead time if you need more than five units at once.
It can clean up to 100 meters high, so it handles mid-rise buildings and towers without issue.
We can start with as few as 5 units for custom builds. Lead time is typically 15-20 business days after order confirmation.
Yes, it's fully certified with CE, FCC, and RoHS, so you're covered for most international markets.
Absolutely—the standard 30L tank and 7.4-10L/min flow rate can be customized based on your job requirements, like higher pressure or longer flight time.
It ships in a foam-lined flight case to prevent damage. Store it in a dry, temperature-controlled area between -10°C and 50°C to keep the battery and frame in good shape.
