Account
Inquiry
We're ordering the H0710 model in the 12-bar configuration with 1200W power, which is what most buyers go with for salon use — the 16-bar version is overkill unless you're running multiple rooms, and the 600W is really only for small clinics with low throughput, so this sits right in the sweet spot for our setup, and it come packed in a flight case that's 56x63x48cm at about 26kg, which is manageable for shipping but you'll want two people to move it around.
It runs on 808nm, 755nm, and 1064nm wavelengths — basically the standard triple wavelength stack for targeting deeper follicles while skipping melanin in lighter skin types — and the frequency goes from 1 to 10Hz, so you can adjust based on the area you're treating, and the cooling system uses semiconductor plus air and water cooling, which is actually better than just air-cooled units for longer sessions since it doesn't overheat as fast, though we usually have stock but confirm lead time (usually 2-4 weeks).
The 15.8-inch 24-color multi-touch LCD screen is pretty straightforward to navigate, and you can set it for hair removal or skin rejuvenation — the sliding therapy mode is what makes it fast for large areas like legs or back, but honestly it's not great for small precision work like upper lips or brows, so you'll still need a smaller diode unit for those spots, and the treatment area covers face, body, and neck but don't expect it to handle tattoos or darker skin tones without careful settings.
We've got CE certifcation on it, which is non-negotiable for our salon clients, and the COA from the suplier shows HPLC purity above 99% for the laser crystals, but what I noticed form the last batch is that the 110V version draws about 12 amps at full power, so check your circuit breakers before instalation — the voltge is switchable between 110V and 220V 50-60Hz, but you'll need to manually flip a switch inside the unit, which isn't hard but nobody tells you about it upfront.
The trademark is customizable on the unit itself, so our company can put our logo on it for branding, and the transport package is a flight case with foam inserts that hold everything in place — the bars come in 6, 10, 12, 14, or 16 bars depending on your preference, but the 12-bar gives you a good balance between coverage area and handpiece weight, and the 14-bar is noticeably heavier after 20 minutes of continuous use, so most techs prefer the 12-bar for daily work.
Anyway, we're ordering 3 units initially with the 12-bar and 1200W configuration, and the MOQ is 1 unit but the per-unit price drops by about 8% at 5 units or so, so if we decide to scale up we'll want to order in batches of 5 next time, and the HS code is 8510300000 which clears customs without issues for laser devices.
The H0710 comes in 600W, 1000W, 1200W, 1400W, and 1600W. You can pick the power level that matches your salon's needs.
Yes, the trademark is customizable. We can put your salon's logo on the device, just let us know the design.
It's CE certified, which means it meets European safety standards. We can provide the certificate upon request.
It comes in a flight case for safe transport. The case dimensions are 56*63*48cm, and the total weight is 26kg.
It uses a triple cooling system: semiconductor, air, and water cooling. This keeps the handpiece cool during long sessions and protects the skin.
