Professional Oxy-Fuel NM250 Brass Body Stainless Steel Cutting Torch for Heavy Duty Metal Fabrication

We've been shippng these out to fabricators who need something that can actually take a beating day in and day out, and what really stands out is the forged brass body with those stainless steel tubes that just don't quit.

It runs on oxygen and acetylene or oxygen and propane depending on what you've got hooked up, and the EN ISO 5172 compliance means it's been tested properly—100% leak tested along with flame and function testing at our end, and the CE mark is there too.

The stainless steel needle valves give you decent sealing regardless of what angle you're working at, and that 90° head makes tight spots a little less awkward to deal with. Most buyers go with the ANME or PNM nozzles for everyday, though capacty up to about 250mm or so depends heavily on which nozzle you pick.

Every torch ships with individual function testing already done, so basically what you get is a ready-to-go unit (check lead time if you need something custom on teh thread size). We're seeing roughly 45 units in stock usually, but confirm lead time for larger quantities.

One thing to keep in mind though—this isn't really suited for light-duty or hobby use, which sounds obvious but some guys try to force it into jobs where a smaller torch would be easier to handle, and the weight difference is noticeable after a few hours.

Anyway, if you're looking at getting set up, our company can handle the m16*1.5 or 9/16''-18 thread options, and usual MOQ is just a single unit so you're not stuck buying a dozen at once.