Account
Inquiry
A shop running 8mm stainless brackets for a furniture contract would get through about 40 sheets a shift with this, give or take setup time, and the 20000mm/min traverse means you're not waiting on the gantry between cuts.
Working area hits 3000x1500mm stock size out of the box, but they'll customize it if your parts are longer or wider, and sawtooth table handles dross better than a flat slat design (especially with thicker plate). Plasma power options run form 63A up to 400A, so you can dial in for 1mm sheet or push to 60mm carbon steel, though the 60mm cut is rough and needs edge starting most times.
It's fully automatic with servo drives and a FASTCAM nesting software that's actually decent for reducing scrap on mixed part runs, but the tube option adds complexity and you'll want to confirm lead time on that. We've had buyers use it for aluminum and copper too, but the surfce finish isn't as clean as a laser on non-ferrous—so it's better suited for structural work than decorative panels. The anti-surge and lightning protection on the CNC is a practical thing if your shop has dirty power, saves controller boards that cost about 800 bucks each to replace.
3-year warranty is included, and the color can be whatever you want (we've done a lot of RAL 5015 blue lately). Standdard votage is 380V/60A, but they'll adjust for your supply if you ask. Usually ships in 20 days or so, but confirm when ordering because the 400A plasma units sometimes have stock issues.
We typically start at 1 unit for this model, but if you need a custom color or special voltage, we may require a bit more. Just let us know your specific needs and we'll work it out.
Standard lead time is around 15-20 working days for a single machine, depending on customization. We'll confirm exact timing once we finalize your specs.
Yes, we can supply CE and ISO certifications with the machine. Just mention which ones you need when you order, and we'll include them in the documentation.
Absolutely, but you'll need the optional tube sheet cutting configuration. The standard setup handles flat sheets up to 3000x1500mm, and adding that option lets you switch to tube processing too.
For 60mm stainless steel, go with the 400A plasma power option. It's our highest rating and handles that thickness cleanly. Lower amps like 200A work for carbon steel at that thickness, but stainless needs more power.
