Siemens 3.5C40S Convex Ultrasound Probe for Prima/Adara Systems - 3.5MHz Frequency

You're scanning at decent depth with this one—teh 3.5MHz convex array gives you good penetration for OB/GYN and urological work, so you'll see clear tissue differentiation down past 15cm or so without losing too much lateral resolution at the focal zone.

It's got 128 elements running at that center frequency, which is a standard spec for this class of probe, and the CE cert means it clears EU customs without extra hoops—we usually have stock, but confirm lead time if you're in the UK with the post-Brexit documentation requirements.

Basically drops straight onto a Siemens Prima or Adara system (we've tested it against both), so you're not messing with firmware patches or connector adapters—it's a clean swap if you're replacing a worn unit or scaling up an exam room.

The housing is metal and plastic, pretty standdard build, but what you'll notice is the cable strain relief is actually beefier than some aftermarket alternatives—less likely to crack after 500 or so scans if you're not careful about coiling it.

Most EU buyers go with the single unit for fast replacement, although you could order multiple for a multi-room setup since the MOQ is 1 and there's no volume discount tier anyway.

for import, the CE certification and a standard commercial invoice are typically enough, but if you're shipping to the US, you'll want a letter of authorization form the manufacturer—something we can provide within 48 hours of order confirmation.