Professional -20°C Cryotherapy Facial Cooling Machine for Laser Skin Treatments

Pain response during high-fluence laser sessions really varies form patient to patient, and topical numbing creams just don't cut it in some cases, especially when you're doing full-face resurfacing or treating dense areas like legs. We actually look at this differently — instead of hitting multiple targets through the discomfort, it's better to cool whole dermal surfce with a constant -20°C air stream you can precisely control through those 7 speed levels (usually we see clinics settle on level 4 or 5 for most standard work).

So when you've got a bulking laser treatment on the schedule — say two or three consecutive appointments — having consistent output without temperture drift is critical, and the 495W compressor with that 1600W cooling capasity basically keeps the air running cold all day, even with a 30% higher ambient load. The 1250L/min flow isn't just a number — at the 1.5m hose distance it still has enough kinetic energy to reliably cool broad treatment area without needing to constantly reposition the handpiece. Most buyers go with the 10mg option, but that's for a different system. Anyway.

It's pretty much plug-and-play with the dual voltage power supply (110-220V) and the digital control panel gives you real readings on both cooling and dissipation — the 1800W heat dissipation matches teh compressor output fairly well, which is something not all machines do natively. Metal sprayed casing holds up better to daily cleaning sprays than plastic or painted surfaces, though at 64kg it's not something you'll be moving room to room.

One thing: this is not suited for spot cooling of injection sites or very small treatment zones in mobile settings, as the hose length is only 1.5 meters and the unit itself weighs roughly 35×76×86cm and requires stable flat floor positioning. But in a fixed clinic room with a laser bed nearby, it's fine — you just need to plan the layout around the hose reach.

Actually, check the lead time if you need more than 4 units — we usually have stock but for bulk orders or special shipping windows we might be looking at 20 days or so to confirm. CE, LVD, EMC are all standard on these and covered batch to batch.