Feeds the tape, clamps it, and makes the seal in about two seconds flat — though that's with teh machine warmed up and properly adjusted, and the tension dial goes from 5 up to 50N so you're not crushing soft boxes or leaving slack on hard ones, but we've found most buyers set it around the middle give or take 10N for general use.
Works with standdard OPP film tape that's 11mm wide and between 0.1 and 0.13mm thick, and the binding size tops out at 200×160mm with a minimum of 20×10mm — we usually keep a couple hundred rolls of tape in stock to match, but check lead time if you need a specific thickness or color because sometimes that stuff isn't on the shelf.
(usually 1-2 weeks) for a standard order, but we've seen it stretch to 3 weeks when customs holds up the batch, and each unit gets a basic function test before it leaves — switch both languages on the display, run a few cycles, check the tension range — though we don't test every single setting because that would take forever.
13kg machine weight, frame opening is 220×170mm, and it needs either 110V or 220V depending on your region — so confirm your voltage when ordering — we've had a few people forget and then our company have to swap the power board which isn't covered under the one-year warranty but parts are avaliable paid.
Actually, it's not great for very heavy strapping like steel banding or for huge boxes that exceed that 200mm width — that's a real limitation you'll hit fast if your cartons get bigger than that, but for smaller packs in food, pharma, or even textile and print shops it's pretty much all you need.
MOQ is usually 1 unit, our company provide a COA for the machine's electrcial safety certs if you need them for your facility, and retest policy is basically "test it on arrival and we'll walk you through any tweaks" — but we don't offer free spare parts after that first year, and that's not negotiable.
The TR-A6 can handle a maximum binding size of 200×160mm and a minimum of 20×10mm. That covers most small to medium packages.
Yes, the tension is adjustable from 5 to 50N, so you can dial it in for delicate items or tighter strapping. Just tweak it on the machine.
It runs on either AC220V/50Hz or AC110V/60Hz, so you can pick the version that matches your local power supply. Just specify when ordering.
The TR-A6 comes with a CE certificate and a 1-year warranty. We can also provide a material certificate for the OPP film tape if needed.
It ships in a 32×30×40cm box weighing 13kg. Store it in a dry, clean place away from dust and moisture to keep it running smoothly.