Account
Inquiry
You're probably spending more time than you should on manual strapping, especially with those stick noodle bundles that just don't stay put, and that's where this fully automatic horizontal track machine actually helps—it uses paper tape, 12-24mm wide, so no plastic waste or heat sealing issues for dry pasta products.
It handles bundle diameters from 16 to 35mm and noodle lengths between 150 and 280mm, which is a tighter range than some general-purpose machines, but if your bundles fall outside those specs you'll need a different configuration, we've had a few buyers realize that after ordering.
Speed tops out at about 26 bundles per minute, give or take, and the 165W single-phase motor runs on 220V/50Hz, we typically suggest a quick votage check before installation since it's not multi-voltage.
The horizontal track bucking method is pretty much standard for stick-shaped items like spaghetti or bamboo sticks, but it's not suited for irregular or curved bundles—those tend to jam the track, and we usually have stock in 30 days or so, but confirm lead time on custom tape widths.
One thing you wouldn't think to ask is that the machine dimensions are roughly 1420×940×1000mm, so it'll need a dedicated floor space with some clearance for the tape reel and operator access, and two years with technical support avaliable for troubleshooting HPLC or COA integration if you're running quailty checks on the strapping tension.
Anyway, most buyers go with the 12mm tape for small noodles and 24mm for wider bamboo sticks, and our company can adjust the track height for different bundle diameters, though the 16mm lower limit is fixed without a rebuild.
No, it's designed specifically for bundles between 16mm and 35mm. If your noodles are outside that range, it won't strap them properly.
Typically, we ship within 7-15 working days after payment, depending on stock. We'll confirm the exact timeline when you place the order.
Yes, we can supply a CE certificate and a material test report for the machine upon request. Just let us know what you need.
No, this machine is built for paper tape only, with widths from 12mm to 24mm. Using plastic tape could jam the horizontal track mechanism.
Keep it in a dry, clean area, ideally covered with a dust sheet. Avoid high humidity and extreme temperatures to protect the electrical parts.
